Achieve Carbon Neutrality is the Important Way to Develop Solar Street Lights
At the 75th UN General Assembly in 2020, China made a solemn promise to the world to strive to achieve the target of carbon peak by 2030 and strive to achieve carbon neutrality by 2060.
How to achieve carbon neutrality? To achieve carbon neutrality is to achieve near-zero carbon dioxide emissions, and to use carbon compensation methods to offset the unavoidable residual carbon emissions, to achieve a balance between carbon dioxide emissions and absorption, that is, "zero" carbon dioxide emissions. This requires a higher proportion of clean energy use to realize the multi-energy complementarity of wind power, photovoltaics, and other renewable energy sources. At the same time, energy conservation and improvement of energy efficiency can be achieved through various technologies.
Outdoor solar led street light is an important public facility in people's daily life. There are more than 100 million outdoor lighting fixtures such as street lights and garden lights in the country, accounting for about 30% of the lighting power consumption, and the power consumption is amazing. The development of solar street lights is an important way to save energy and reduce emissions.
1. Efficient light source provides uniform illumination
KY-Harmony solar street light adopts Philips light source chip with uniform illumination and no glare. Its light output, luminous efficiency, and service life have all reached international standards. The patented lens forms a bat-wing light distribution to achieve uniform light distribution and greatly improve the lighting effect. The hue will change with different seasons, from 3000K to 5700K, and you could choose the cold or warm light to meet the lighting needs of different environments.
道路模拟报告3030 Road Simulation Report 3030
注释：对称布灯；Note: Symmetrical lighting;
杆间距建议是杆高的3倍; The recommended pole spacing is 3 times the height of the pole;
(120W参数 120W parameter 网格 grid 平均照度 average illuminance 最小照度minimum illuminance 最大照度 maximum illuminance 平面照度曲线 plane illuminance curve 单位为Lux unit: Lux比例1：215 ratio 1:21.5安装高度installation height 中心距 center distance
子午面配光曲线Meridian plane light distribution curve
平均光束角Average beam angle
光强The light intensity)
2. Unique heat dissipation module ensures that the light source is at the best working temperature
Most solar street lights use LED light sources for reducing energy consumption. The most important thing is that LED light sources have a long service life, but their service life is affected by external factors in addition to their own conditions. If you want to increase the service life of the LED light source, you should pay attention to its heat dissipation and constant current. A good heat dissipation function is the basis for controlling the internal temperature of the lamp, and keeping the internal temperature of the lamp constant can prolong the service life of the LED lamp beads.
(电源power supply; 散热孔 heat dissipation hole; 散热片cooling fin
Φ60mm套筒 Φ60mm sleeve; 飞利浦3030灯珠Philips 3030 lamp beads; 高压铸铝灯体High pressure cast aluminum lamp body)
Harmony solar street light uses cooling fins with excellent thermal conductivity, with large internal cavity space and large heat exchange area, which can take away more heat.
3. High-efficiency solar panels
Battery panels of Harmony solar street light are divided into monocrystalline silicon and polycrystalline silicon types.
The photoelectric conversion efficiency of monocrystalline silicon solar panels is 18%, which is currently the highest in all types of solar panels. Monocrystalline silicon is generally encapsulated with toughened glass and waterproof resin, which is sturdy and durable, and its service life is generally up to 15 to 25 years.
The production process of polycrystalline silicon solar panels is similar to that of monocrystalline silicon solar panels, and its photoelectric conversion efficiency is about 17%. The battery panel is encapsulated by tempered glass, which is sturdy and durable, with a life span of 15 to 25 years. In terms of production cost, it is cheaper than monocrystalline silicon solar panels.
4. Storage and control all-in-one machine
Harmony all-in-one solar lamp uses: 32650 lithium iron phosphate battery, up to 2000 deep cycles, safe and reliable, no fire, no explosion; 6030 aluminum, with good corrosion resistance, toughness, sturdiness and durability; intelligent controller, with intelligent control of lighting time, overcharge, over-discharge, electronic short circuit, overload protection, anti-reverse connection protection and other functions, which can adapt to cold, high temperature, humidity, and other environments.
5. Reasonable structure design, stylish and modern appearance
The structure design is reasonable, the multi-modules are embedded, the installation and disassembly do not need to open the cover, and the operation is convenient; the circuit connection adopts the method of plug and unplug, and the maintenance is simple. The design is novel, the appearance is beautiful, and the new era elements are cleverly added to express fashionable and modern style. There are three lamp sizes and four colors to choose from, suitable for streets, squares, communities and other places.
类型：LED路灯 和谐 Type: LED street light (Harmony)
颜色：深灰、浅灰、白色、蓝白Color: dark grey, light grey, white, blue white
6. User case
(1) Inner Mongolia Alxa Factory; Model: KY-HX. TYN-001 Specifications Quantity: 180 sets of 8m 100W battery panels 130W2 pcs of lithium battery 70AH2 pcs
(2) Sendqiao Town, Gaoyou, Jiangsu
Model: KY-HX. TYN-001 Specifications: 50 sets of 80W solar street lights